In Stock
Delivery Included
This is FMS 1/24 FCX24 Power Wagon Blue 4WD Crawler RTR w/ 2.4GHz Radio. FCX24 is positioned as a high-performance crawler chassis. The carframe is made of high-strength nylon.
Compared with the trapezoidal beam spliced by metal side beams and plastic trusses, the overall weight is lighter and the strength is higher. The mid-mounted power assembly has a low center of gravity and integrates the 2-speed transmission, transfer case and 130 motor. The power is transmitted to the front and rear axles through the universal joint drive shaft. The axles are equipped with wheel side reducers, commonly known as "portal axle", which can increase the ground clearance of the differential tooth pack and improve the passability.
The crawlersare generally equipped with front and rear straight axles to simulate the locked state of the real car differential to improve off-road passing ability. The FCX24 is equipped with a straight axle by default, but the planetary gear differential can also be replaced with high-viscosity silicone oil to simulate the driving effect of an LSD limited-slip differential. After installing the differential, the ultimate climbing ability will be reduced, but a smaller turning radius and a more stable high-speed driving quality can be obtained. Simply put, the straight axle is suitable for extreme climbing, and the limited-slip differential is suitable for high-speed off-road. The choice is yours.
The two-speed gearbox uses the CH3 of the remote control and is operated by a 9G steering gear. The low gear reduction ratio is 99, which is larger than that of similar products currently on the market. The torque output is strong, and easy for extreme climbing. The high gear reduction ratio is 24.75, and the speed is higher than that of all similar products currently on the market. You can experience the fun of high-speed breakthrough, small jump, and even heading up.
Stainless steel ball bearings are always the favorite of players, but in order to reduce the street price, most brands will choose bushings as a replacement for all or part of the bearings. However, considering that players need to completely disassemble the whole car to upgrade the bearings in future, which is slow and laborious, FCX24 chooses to pre-install the whole car with a total of 24 bearings, which does not need to be disassembled and re-upgraded, saving time and effort, and addresses the concern once for all.
As the first product of the FCX24 series, the car body is the POWER WAGON in 1949, which appeared in the form of a mud off-road truck. We put the reason and future development in this story to share with you. 2.4G 4-channel digital proportional remote control system, in addition to normal driving and steering control, the CH3 is used to control shifting, and the CH4 is reserved for players’ imagination expansion. It is also equipped with a lighting control module, and the headlights can be switched between high and low beams. In addition, interfaces for taillights and turn lights are reserved for players to modify.
Unlike previous FMS products, FCX24 focuses more on sports performance. A large number of upgraded and modified parts such as metal gears, shock absorbers, high-performance motors, radiators, and wheel hub counterweights will be launched simultaneously. Players from all over the world, look forward to you creating your own unique FCX24.
Feature:
- Ready to run model
- Two-speed transmission
- Portal axle
- 24 ball bearings full set
- Metal gears steering servo
- Four link suspension
- High-strength integrated nylon frame
- Power wagon polystyrene body
- Rapid separation of car body
- Nylon roll cage
- Painted body
- The remote control lighting system
- Original personalized stickers
Specification:
- Tire: Φ 60×20mm
- Wheel Base: 138mm
- Minimum Ground Clearance: 26mm
- Approach Angle: 68°
- Departure Angle: >90°
- Driving Speed: 8km/h Max
- Remote Distance: 30m
- Play Time: 20 minute
Include:
- 1/24 FCX24 POWER WAGON RTR
- 2.4GHz Radio
- 2-in-1 Receiver / 20A ESC (installed)
- 131 Brushed Motor (installed)
- 3-wire 9g Metal Servo (installed
- 7.4V 380 mAh Battery
- USB Battery Charger
- Hex Wrench Socket
- Product Manual
Required:
Manufacturer: FMS
Part Number: FMS12401RTRRDV2
EAN: 5056135763490
Power Bundles: No Bundle Required
Skill Level: Skill Level 1
Vehicle: Rock Crawler
Scale: 1:24
Assembly Type: Assembled (RTR)
Surface Type: Off-Road
Drive: 4WD
Motor Type: Brushed
We want to ensure a smooth delivery experience for you, and here are some key details to keep in mind about our service.
- For orders exceeding £120, delivery is available exclusively to mainland UK addresses. However, orders below £120 can be delivered to outlying Isles and Northern Ireland, provided they meet specific criteria: they must be deliverable by Royal Mail, weigh less than 30kg, and fit within the dimensions of 61cm x 46cm x 46cm. Please be aware that certain highland areas may entail additional delivery fees, as couriers often charge more for these deliveries. If you reside in the highlands or any outlying regions, we recommend reaching out to us before placing your order to verify delivery options and any potential extra charges.
- Delivery is typically included in the price for the majority of our products, unless otherwise specified. However, please note that orders under £80 will incur an additional delivery charge. You can easily view this charge on the checkout page when finalising your purchase. We aim to maintain transparency in our pricing structure while providing you with the best possible service.
- Most orders will be delivered via either a next working day delivery service or within 2 working days, depending on your chosen service. Please note that for next working day delivery, the cut-off time is 12pm, and dispatch occurs exclusively on weekdays. However, certain items may have longer shipping times, and the expected delivery period will be clearly specified in the product listing.
- To streamline your order fulfillment process, please note that when your order includes items with varying shipping times, we follow this approach: If any item in your order has a longer shipping time, we will hold the entire order until all items are in stock. However, if certain items are expected to be restocked after a considerable delay, we offer you two options. You can choose to wait for complete fulfillment, where we'll dispatch the order once all items are back in stock. Alternatively, you have the option to receive a partial delivery, where we'll promptly send you the in-stock items and deliver the remaining items as they become available. Your satisfaction and convenience are paramount, and we strive to accommodate your preferences for multi-item orders.
- To ensure efficient delivery, we work with trusted carriers: DPD Local for next working day delivery and Royal Mail for the 2 working days option.
- After dispatching your goods, we'll promptly send you an email containing the parcel's tracking number. To ensure you stay updated conveniently, kindly provide a valid mobile number, which we will add to the consignment. This way, you can receive real-time updates on your mobile phone for added convenience.
- For listings specifying a shipping time of "Dispatched within 3 working days," please note that orders under this category will typically be delivered within a timeframe of 3 to 5 working days.
